Sharp AR-M350 AR-M280 AR-M350 AR-M450 Operation Manual (for facsimile) - Page 80
Fax default settings
View all Sharp AR-M350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
KEY OPERATOR PROGRAMS Fax default settings The default fax settings can be changed as necessary to meet your faxing needs. The default fax settings are as follows: qOwn number and name set qDial mode setting qAuto wake up print qPause time setting qSpeaker volume setting qOriginal print on send error report qRemote reception number setting (only when extension phone is connected) qTransaction report print select setting qActivity report print select setting qECM (This setting is only effective if the other machine is a G3 machine that supports ECM) qDistinctive ring detection Own number and name set Use this setting to enter the fax number of the machine and the name of the user. The entered name and number are printed at the top of each fax page you send. The number is also used as a passcode when performing polling reception (page 3-5). You can check your entries by printing out the Sender List. Refer to page 8-10. 1 Touch the NAME key and enter the name. The name entry screen appears. Up to 20 characters can be entered for the name. Refer to page 6-15 for the procedure for entering characters. 2 Touch the FAX No. key and enter the fax number. Enter up to 20 digits for the number using the numeric keys. To enter a "+", press the " " key. To enter a space, press the SPACE key. If you make a mistake, press the C key and re-enter the correct digit. 3 Touch the OK key. You will return to the OWN NUMBER AND NAME SET screen. The number you entered appears. Make sure it is correct. Dial mode setting (Setting your line type) Select the appropriate setting for your line type. "Tone" is normally selected. It is also possible to have the machine automatically select the line type. Make sure that the telephone line is connected to the machine, and then press the AUTO SELECT key at the lower right. The machine will automatically select "Tone" for a tone dial line, or "Pulse" for a pulse dial line. Auto wake up print Use this setting to select how the machine responds if a fax is received when the main switch is turned off (the fax switch is turned on). Auto wake up print is normally turned on, which means that the machine automatically activates and prints the received fax. If you turn off this setting, received faxes will not be printed until the main switch is turned on. Pause time setting This setting is used to select the duration of pauses that are inserted in destination fax numbers. Normally the setting is 2 seconds, which means that each time the PAUSE key is touched when dialing or storing a fax number, a pause of 2 seconds is inserted.You can select any number of seconds from 1 to 15. 8-4