Sharp CD-BA2600 CDBA250|CDBA2600 Operation Manual - Page 25

Dubbing from Tape to Tape You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal or CrO tapes. 1 Press the ON/STAND-BY button to turn the power on. 2 Load a prerecorded cassette into the TAPE 1 cassette compart- ment. Insert a blank tape into the TAPE 2 cassette compartment. It is recommended that the recording tape is the same length as the master tape. 3 Press the TAPE (1 2) button until "TAPE 1" appears on the dis- play. 4 Press the REC PAUSE ( ) button. Recording will be paused. 5 Press the / button on the main unit or the TAPE 2 the remote control to start dubbing. button on Tape Recording - Dubbing from Tape to Tape - To stop dubbing: Press the (TAPE ) button. TAPE 1 and TAPE 2 will simultaneously stop. „ Erasing recorded tapes 1 Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you. 2 Press the TAPE (1 2) button until "TAPE 2" appears on the display. 3 Press the REC PAUSE ( ) button. 4 Press the / button on the main unit or the TAPE 2 button on the remote con- trol to start erasing. Note: Make sure that the TAPE 1 is not in use. 25 00/12/4 CD-BA250(U)3.fm