Sharp CD-BA2600 CDBA250|CDBA2600 Operation Manual - Page 28

Advanced Features - Enhancing Your System - Enhancing Your System The connection cord is not included. Purchase a commercially available cord as shown below. VCR, DVD, etc. Red White White To the line output jack Red RCA cord (not supplied) „ Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/ AUX jacks. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Play the connected equipment. Note: To prevent hum interference, place this unit away from a television. „ To record on a tape 1 Insert a cassette in the TAPE 2 cassette compartment. 2 Press the VIDEO/AUX button. 3 Press the REC PAUSE ( ) button. 4 Press the / (TAPE 2 ) button. 5 Play the VCR, DVD, etc. „ Headphones z Before plugging in or unplugging the headphones, reduce the volume. z Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. z Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons. 28 00/12/4 CD-BA250(U)3.fm