Sharp CD-ES777 CD-ES777 Operation Manual - Page 24

CD-ES777 Listening to a cassette tape (TAPE 1 or TAPE 2) (continued) Various tape functions Function Play Main unit Remote control Operation Press in the stop mode. Stop Fast forward/ Rewind (TAPE 2 only) Press in the playback, fast forward or rewind mode. Press in the playback or stop mode. Recording on a cassette tape Before recording: When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). For recording, use only normal tapes. Do not use metal or CrO tapes. Erase-prevention tab of cassette tapes: When recording on a cassette tape, make sure that the eraseprevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab. Tape Playback Caution: To remove the cassette, press the (TAPE ) button, and then open the compartment. Before changing from one tape operation to another, press the (TAPE ) button. If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. In this case, wait until the power is restored. Side A Tab for side B Tab for side A 24