Sharp CD-RW5000 CDRW5000 Operation Manual

Sharp CD-RW5000 Manual

Get Sharp CD-RW5000 PDF manuals and user guides View all Sharp CD-RW5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp CD-RW5000 manual content summary:

  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 1
    AUDIO TOWER SYSTEM MODEL CD-RW5000 OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-RW5000 Audio Tower System consisting of CD-RW5000 (main unit)
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 2
    Important Instruction Special Notes CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 3
    SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 6 Ventilation - The appliance Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 4
    CD-RW 27 Recording to a CD-R or a CD-RW 28-32 Playing discs on the CD-R tray 32 Text editing on a CD-R or a CD-RW 33-35 Finalizing a CD-R or a CD-RW 36 Erasing (CD-RW only 37 s Advanced Features Timer and Sleep Operation 38-40 Enhancing Your Stereo System 41-42 s References Troubleshooting
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 5
    higher than 140°F (60°C) or to extreme low temperatures. q If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug cabinet (CD q Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 6
    Button 15, 44 06. CD Direct Play Buttons (with Indicator)/ CD Tray Eject Buttons 18, 20 07. CD Trays 18 08. CD/CD-R/CD-RW Play Mode Select Button 21 09. CD-R/CD-RW Text Edit Button 33, 36 10. Headphone Jack 41 11. CD-R/CD-RW Tray Eject Button 28 12. CD-R/CD-RW Tray 28 13. Control
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 7
    page 21. Tuner (Band) Button 23, 39 22. CD-R/CD-RW Record Button 31 23. CD Button 18, 25, 28 24. CD Track Edit Button 30 25. CD-R Button 33, 36 26. CD CD-R One Touch Edit Button 29 27. CD-R/CD-RW Finalize Button 36 28. CD/CD-R/CD-RW Fast Reverse, Tape Fast Wind or Tuning Down Button
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 8
    Mode Indicator 04. FM Stereo Indicator 05. Extra Bass Indicator 06. Record Indicator 07. CD/CD-R/CD-RW Play Indicator 08. CD Indicators 09. Cassette Indicator 10. CD CD-R High Speed Record Indicator 11. CD-R/CD-RW Indicator 12. Auto Mark Indicator 13. Erase Indicator 14. Digital Source Indicator 15
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 9
    General Information s Rear panel Reference page 01. AM Loop Antenna Terminal 12 02. Antenna Ground Terminal 12 03. FM Antenna Terminal 12 04. Auxiliary Input Jacks 41 05. Phono Input Jacks 41 06. Digital Input Jack 41 07. Digital Output Jack 41 08. Speaker Terminals 12 1 8 09. AC
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 10
    Up Button 19, 20, 24, 29 22. Stop Button (No. 29) 23. Display Button 15, 17, 32 24. Tape Record Pause Button (No. 37) 25. CD/CD-R/CD-RW Play Mode Select Button (No. 8) 26. Clear Button 20, 24 27. FM Stereo Mode Button 23 28. Equalizer Mode Select Button (No. 14) 29
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 11
    Terminals 6. Main Speaker Terminals *RW5000_P04_11(General) 11 Placing the speaker system: Left speaker There is no distinction between the right and the and the other rebounds from the wall behind the speaker. Bi-amp system: This product drives the built-in subwoofer unit and the speaker unit
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 12
    Preparation for Use System Connections FM antenna AM loop antenna RightsBpleu aeker Black R,ed 1 2 Le,,ft3speaker Right speaker Left speaker AC outlet (AC 120 V, 60 Hz) 12 *RW5000_P12_14(Preparation) 12 00.7.8, 4:28 AM
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 13
    unit. q Never mistake the MAIN and the SUBWOOFER terminals. The stereo system or the speakers may be damaged . q Only the included speakers wall with screws (not supplied). Note: q Placing the antenna on the stereo system or near the AC power cord may cause s Connecting the AC power cord After
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 14
    or if the operation be- comes erratic. q Periodically clean the transmitter on the remote control and the sensor on the ste- reo system with a soft cloth. q Exposing the sensor on the stereo system to strong light may interfere with opera- tion. Change the lighting or the direction of the stereo
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 15
    When dark s Switching the display Press the DISP/CHARACTER button repeatedly to switch the display. Level meter Spectrum analyzer q When you loaded a CD with text data, the display will show the following information in turn: Playing time → Artist name → Title name → Playing time 15 00
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 16
    Sound Control Basic Operation 16 *RW5000_P15_17(Basic) 16 s Volume control Press the VOLUME W button to increase the volume and the VOLUME X button for decreasing. s Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies,
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 17
    -hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1. Clear all the programmed contents. [Refer to "If trouble occurs (reset)" on page 44 for details.] 2. Perform "Setting the Clock" from the beginning. "AM 12:00"→ The 12-hour display will appear. (AM 12
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 18
    to a CD (CDs) This system can play audio CD-R and CD-RW discs just as CD discs. You can play CD TEXT logo carrying discs whose text information is displayed during playback. s To play discs in turn (from Disc 1 to Disc 6) 1 Press the POWER button to turn the power on. 2 Press the CD button
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 19
    and hold down the 2 button during playback. Caution: q Do not place two CDs in one disc tray. q Do not push the disc tray while it is moving then turn the power on again. q If TV or radio interference occurs during CD operation, move the unit away from the Notes: q Normal playback will resume
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 20
    Advanced CD Playback (continued) s To specify a disc to play You can play a disc by specifying the Even if you press the POWER button to enter the stand-by mode or change the function from CD to another function, the programmed selections will not be cleared. 20 q During program operation, random
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 21
    . Notes: q After using repeat or random play, be sure to press the s button. Otherwise, the disc(s) will play continuously. q In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.) To cancel repeat or random play: Press the PLAY MODE
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 22
    Listening to a Cassette Tape 1 Press the POWER button to turn the power on. 2 Press the TAPE button. 3 Open the cassette door by pushing the area marked "PUSH EJECT 7". PUSH EJECT 7 Playback 22 *RW5000_P18_24(Playback) 22 4 Load the cassette into the compartment with side A facing you. 5
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 23
    the TUNER (BAND) button to select the desired frequency band (FM or AM). 3 Press the TUNING (X or W) button to tune into the desired sta- tion. Manual tuning: Press the TUNING (X or W) button as many times as required to tune into the desired station. Auto tuning: When the TUNING (X or W) button is
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 24
    Listening to the Radio (continued) s Preset tuning You can store 40 AM and FM stations in memory and recall them at the push of a button. 1 Perform steps 1 - 4 in the "Tuning" section on page 23. 2 Press the ENTER button to enter the preset tuning saving mode. 3 Within 5 seconds, turn the jog dial
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 25
    the desired disc. 3 Load a cassette into the compartment with side A facing you. The CD and tape will stop. Auto restart function: If the recording side is switched from side A to B during recording, the system will record the interrupted track on side B from its beginning. The recording will be
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 26
    to record on side A, or the 1 button for side B. 26 *RW5000_P25_26(Recording) 26 q When you press the 06 button on the remote control, the system will record on the side specified in step 4. To interrupt recording: Press the TAPE REC button. To resume recording, press the same recording button
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 27
    Operation What is CD-R or CD-RW? s Recordable discs For recording, use audio discs only. This player is compatible with CD-R discs, CD-RW discs, and audio CDs with either mark below. CD-R: Compact Disc-Recordable CD-RW: Compact Disc-ReWritable s Serial Copy Management System (SCMS) This player
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 28
    power on. 2 Press the CD button and load the desired CD(s). 3 Press the CD-R/CD-RW 7 button. 4 Place the CD-R or CD-RW disc on the CD-R/CD-RW tray, label side up. 5 Press the CD-R/CD-RW 7 button to close the tray. CD-R or CD-RW q While the system reads the CD-R or CD-RW disc, mark flashes. Wait
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 29
    longer than the recordable time of the CD-R/CD-RW disc, "OVER" appears. Then, the system displays the following information. Exceeding number disc after recording. MANUAL : Does not finalize the disc. Refer to page 36 for manual finalizing. (An unfinalized disc cannot be played on a CD player.) 9
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 30
    will stop. "EDIT OVER" indication in step 4: If the recording time is longer than the recordable time of the CD-R/CD-RW disc or if the recording tracks reach 32, "EDIT OVER" appears and the system does not accept further editing. Record tracks selected before "EDIT OVER" appears. q Because the
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 31
    CD-RW disc. (See page 28.) 3 Press the REC MODE button. S. SYNC REC: When sound signal is input after pressing the 06 button, recording will start automatically. MANUAL REC: After pressing the 06 button, recording will start. q Select one of the above recording types using the jog dial. Then, press
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 32
    : q The operation "To locate the beginning of a track" on a disc on the CD-R tray plays from the beginning of the previous track. q During "Programmed play" on a disc on the CD-R tray, the programmed content will be erased when the system enters the stand-by mode or when the function is changed to
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 33
    See page 28.) 2 Press the CDR button, then press the TEXT EDIT button. q If it is a finalized CD-R disc, "FINALIZED CD" appears. You can not perform text editing on the disc. q If it is a CD-RW disc, "UNFINALIZE ?" appears. Press the ENTER button to unfinalize it. 3 Select "TEXT EDIT" using the jog
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 34
    on the unit to flash the character to delete. 3. Press the DELETE button. 4. Press the s button to finish. s Erasing disc and track names 1 Load a CD-R or CD-RW disc. (See page 28.) 2 Press the CDR button, then press the TEXT EDIT button. 3 Select "TEXT ERASE" using the jog dial, then press the
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 35
    remain in the main unit memory, if the disc is removed without finalizing. 1 Load a CD-R or a CD-RW disc. (See page 28.) 2 Press the CDR button, then press the TEXT EDIT text data of other discs, repeat step 2 and 3. 5 Press the s button to finish. *RW5000_P27_37(CD-R) 35 00.7.14, 3:52 PM 35
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 36
    Operation Finalizing a CD-R or a CD-RW s Finalizing manually If you select the manual finalizing recording (pages 28 -29), the disc should be finalized after all tracks are recorded or characters are entered. 1 Place an unfinalized CD-R or CD-RW disc on the CD-R/CD-RW tray. 2 Press the CDR button
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 37
    ERASE button. 5 Press the ENTER button again. Example) Selected: ALL ERASE q If it is a finalized CD-R disc, "FINALIZED CD" appears. You can not perform erasing on the disc. q If it is a CD-RW disc, "UNFINALIZE ?" appears. Press the ENTER button to unfinalize it. 4 Select the erasing type using
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 38
    Timer and Sleep Operation Timer playback: The unit turns on and plays the desired source (CD, CD-R/CD-RW, tuner, tape) at the preset time. At the end time, the unit enters the power stand-by mode automatically. Timer recording: The unit turns
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 39
    to the AUX IN jacks, select "AUX" in step 11. At this time, only this stereo system will be turned off automatically. (Another unit will not be turned off.) To select the timer playback source : CD, CD-R/CD-RW, TUNER (BAND) or TAPE. To select the timer recording source : TUNER (BAND). To change
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 40
    s Sleep operation The radio, compact disc, cassette tape and CD-R/CD-RW disc can all be turned off automatically. s To use (Maximum: 2 hours - Minimum: 30 minutes) 4 Press the ENTER button. 5 Your system will enter the power stand-by mode automatically after the preset time has elapsed. q The
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 41
    System Connecting your player to other audio equipment AUX IN/PHONO/DIGITAL IN: To record playback sounds of external equipment using an analog or digital cable (separately available). DIGITAL OUT: To record this CD . q No sound is heard during opening the CD-R tray or reading the disc if you have
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 42
    Stereo System ( jog dial. Then, press the ENTER button. 7. If you have selected "MANUAL REC", you can turn on or off it using the AUTO MARKER button the unit to the AUX IN, PHONO or DIGITAL IN jack. 5. Play a CD, CD-R or CD-RW disc on this unit. 2. Press the POWER button to turn the power on
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 43
    Troubleshooting Chart Many potential "problems" can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service wires disconnected? s CD player Symptom q The stereo system is placed
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 44
    Troubleshooting Chart (continued) s CD-R/CD-RW recorder Messages for CD-R/CD-RW disc loading Message Possible cause ? DISC A disc other than an audio CD-R disc is loaded. CDR NO DISC OPC ERROR No disc is loaded. Cannot read the CD-R disc. (A CD-R disc cannot be read if loaded.) NOT AUDIO
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 45
    causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use. q In order to ensure proper operation of the CD player and CD-R/CD-RW recorder, preventative maintenance
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 46
    50-14,000 Hz (Normal tape) 50 dB (recording/playback) 0.3 % (WRMS) s Tuner Frequency range FM: 87.5-108.0 MHz AM: 530-1,720 kHz s CD-R Type Signal readout Rotational speed Error correction Quantization Filter Frequency response D/A converter Dynamic range 1-disc compact disc recorder/player Non
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 47
    Weight 3-way type speaker system 2" (5 cm) Tweeter 5-1/4" (13 cm) Woofer 5-1/4" (13 cm) Subwoofer 200 W 100 W 6 ohms Width: 8-1/4" (210 mm) Height: 15-7/16" (392 mm) Depth: 13-9/16" (345 mm) 11.2 lbs. (5.1 kg)/each As part of our policy of continuous improvement, SHARP reserves the right to make
  • Sharp CD-RW5000 | CDRW5000 Operation Manual - Page 48
    were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in CD-RW5000 Audio Tower System (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-RW5000 Audio Tower System consisting of CD-RW5000 (main
unit) and CP-RW5000 (speaker system).
AUDIO TOWER SYSTEM
MODEL
CD-RW5000
OPERATION MANUAL
*RW5000_P01,48(FRONT/BACK)
00.7.1, 4:33 PM
1