Sharp CD-RW5000 CDRW5000 Operation Manual - Page 17
Setting the Clock
View all Sharp CD-RW5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Basic Operation Setting the Clock 6 Turn the jog dial to adjust the hour and within 2 minutes, press the ENTER button. q When the 12-hour display is selected, "AM" will change automatically to "PM". 7 Turn the jog dial to adjust the minutes and within 2 minutes, press the ENTER button. In this example, the clock is set for the 12-hour (AM12:00) display. 1 Press the POWER button to turn the power on. 2 Press the MENU button. 3 Turn the jog dial to select "CLOCK" and within 10 seconds, press the ENTER button. q The hour will not advance even if minutes advance from "59" to "00". q The clock starts from "0" second. (Seconds are not displayed.) The time display will disappear after a few seconds. To confirm the time display in the stand-by mode: Press the DISPLAY button on the remote control. The time display will appear for about 3 seconds. 4 Within 2 minutes, press the ENTER button again. Note: "CLOCK" will appear or time will flash at the push of the DISPLAY button when the AC power supply is restored after a power failure or after unplugging the unit. Reset the clock as follows. 5 Turn the jog dial to select the 12-hour or 24-hour display and within 2 minutes, press the ENTER button. To reset the clock: Perform "Setting the Clock" from the beginning. At this time, step 5 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1. Clear all the programmed contents. [Refer to "If trouble occurs (reset)" on page 44 for details.] 2. Perform "Setting the Clock" from the beginning. "AM 12:00"→ The 12-hour display will appear. (AM 12:00 - PM 11:59) "AM 0:00" → The 12-hour display will appear. (AM 0:00 - PM 11:59) "0:00" → The 24-hour display will appear. (0:00 - 23:59) 17 *RW5000_P15_17(Basic) 17 00.7.8, 4:29 AM