Sharp CD-RW5000 CDRW5000 Operation Manual - Page 15
Basic Operation
View all Sharp CD-RW5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
General Control *RW5000_P15_17(Basic) 15 s Demonstration Mode The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the DEMO button. The unit will enter the low power consumption mode. To return to the demonstration mode: When the unit is in the power stand-by mode, press the DEMO button again. s Opening and closing the control panel The control panel is motorized. The control panel automatically opens when the power is turned on, and closes when the unit is set to the power stand-by mode. When the power is turned on, you can open or close the control panel by pressing the control panel open/close 7 button. Caution: q Do not push the control panel while it is opening or closing. q Do not press buttons on the control panel strongly. The hinge of the panel may be broken. q Be careful not to jam your fingers in the control panel. s Display Brightness (2 levels) You can switch the display brightness by pressing the DIMMER button. When bright When dark s Switching the display Press the DISP/CHARACTER button repeatedly to switch the display. Level meter Spectrum analyzer q When you loaded a CD with text data, the display will show the following information in turn: Playing time → Artist name → Title name → Playing time 15 00.7.8, 4:29 AM Basic Operation