Sharp CD-RW5000 CDRW5000 Operation Manual - Page 44
Troubleshooting Chart continued
View all Sharp CD-RW5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
References Troubleshooting Chart (continued) s CD-R/CD-RW recorder Messages for CD-R/CD-RW disc loading Message Possible cause ? DISC A disc other than an audio CD-R disc is loaded. CDR NO DISC OPC ERROR No disc is loaded. Cannot read the CD-R disc. (A CD-R disc cannot be read if loaded.) NOT AUDIO The disc is not an audio one. s If trouble occurs (reset) When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Press the POWER button to enter the power stand-by mode. 2. While pressing down the VOLUME X button, press the POWER button un- til "ALL CLEAR" appears. Messages for CD-R/CD-RW disc recording or editing Message Possible cause COPY PROTECT CAN'T COPY A copy prohibited signal was found by the SCMS. (See page 27.) CAN'T REC Error occurred during recording. DISC ERROR Error occurred during recording or editing. DISC FULL No space left on the CD-R. FINALIZED CD Performed recording or editing on a finalized CD-R. If it is a CD-RW disc, it can be unfinalized. (See page 36.) NO SIGNAL No signal is sent from the cable (AUX OPT. terminal). Caution: This operation will erase all data stored in memory including clock and timer settings, and tuner and CD presets. s Before transporting the unit Remove the CD-R/CD-RW disc and all CDs from the unit. Your unit checks whether there are any discs inside the unit when the tray is closed. "CDR NO DISC" and "CD NO DISC" appear if no disc is left. Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside can damage it. 44 *RW5000_P43_47(References) 44 and 00.7.13, 3:18 PM