Sharp CD-SW300 CD-SW300 Operation Manual - Page 19

Playback will begin from track 1 on disc 1. After that disc finishes playing, the next disc will automatically play. After the last track on the fifth disc is played, the unit will stop automatically. When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc. To exchange other discs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the button and exchange discs. To remove the discs: In the stop mode, press the 1 - 5 button and within 5 seconds, press the button. Caution: Do not place two discs in one disc tray. Do not play discs of special shapes (heart, octagon, etc.) as it may cause malfunctions. Do not push the disc tray while it is moving. If the power fails while the tray is open, wait until the power is restored. If the disc tray is stopped with force, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. Various disc functions Function Play Main unit Remote control Operation Press in the stop mode. CD-SW300 Stop Press in the playback mode. Pause Track up/ Track down Fast forward/Fast reverse Press in the playback mode. Press the / button to resume playback from the paused point. Press in the playback or stop mode. If you press the button in the stop mode, press the / button to start the desired track. Press and hold down in the playback mode. Release the button to resume playback. CD or MP3/WMA disc Playback 19