Sharp CD-SW300 CD-SW300 Operation Manual - Page 32
Tape Recording
View all Sharp CD-SW300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Tape Recording CD-SW300 Recording on a cassette tape (continued) Recording from a CD or MP3/WMA disc 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 4 Press the button. Recording will be paused. 5 Press one of the 1 - 5 buttons to select the desired disc. 6 Within 5 seconds, press the / button to start recording. Recording is started from the selected disc. When the playback of the last track is finished or the end of the tape is reached, the disc and the cassette will stop automatically. Playback of the disc will start approximately 7 seconds after the tape starts. To stop recording: Press the (TAPE ) button. The disc and tape will stop. 32