Sharp CD-SW300 CD-SW300 Operation Manual - Page 35

CD-SW300 4 Within 10 seconds, press the or button to se- lect "ONCE SET" or "DAILY SET", and press the MEMORY button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY button. White Red The illustrations show the daily timer setting. 6 Press the or button to adjust the hour and then press the MEMORY button. 9 Switch input with the or press the MEMORY button. button, and then To select the timer playback source: CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER. When you select the tuner, select a station by pressing the or button, and then press the MEMORY but- ton. If a station has not been programmed, "NO PRESET" will be displayed and timer setting will be canceled. 10Adjust the volume using the VOLUME control, and then press the MEMORY button. Do not turn the volume up too high. 11Press the ON/STAND-BY button to enter the power stand- by mode. The "TIMER" indicator lights up and the unit is ready for timer playback or timer recording. Advanced Features The illustrations show the timer playback setting in the daily timer mode. 7 Press the or button to adjust the minutes and then press the MEMORY button. 8 Set the time to finish as in steps 6 and 7 above. Continued to the next page 35