Sharp CDG14000 CD-G14000 Operation Manual - Page 18

General control CD-G14000 POWER ON/ STAND-BY 5 4 3 2 1 TIMER POWER ON/ STAND-BY CD TAPE (1 2) TUNER (BAND) AUDIO IN PRESET TUNING VOL. REMOTE SENSOR c OPEN/ CLOSE 5 4 3 PRESET 2 1 VOL. TUNING - VOL. VOL. Basic Operation To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Display brightness control To dim the display brightness, hold down the CLEAR/DIMMER button on the remote control for 2 seconds or more. Volume auto fade-in If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level. 18 Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 0 ..... 30 MAXIMUM Bass control (X-BASS) When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "XBASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO button. Equalizer When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears. FLAT No equalization. ROCK For rock music. CLASSIC For classical music. POPS For pop music. VOCAL Vocals are enchanced. JAZZ For jazz. Note: The extra bass mode is canceled when the EQUALIZER MODE button is pressed.