Sharp DV-AT4000 DV-AT4000 Operation Manual (DVD Player in HT-AT4000) - Page 12

DV-AT4000 System connections Caution: Turn off all other equipment before making this connection. " Digital connection to a surround amplifier, etc. Connect the unit to a DTS digital surround amplifier, etc. to enjoy DVD/CD sounds through other equipment. " Digital connection to a digital audio recorder, etc. TV (Connecting to a TV, refer to 13 -14 pages.) Audio signal Optical digital cable (commercially available) To the optical digital audio input jack Preparation for Use - System connections - SHARP 9HX55769150 Digital audio cable (supplied) Audio signal Dolby Digital/DTS amplifier etc. To coaxial digital audio input jack 12 Digital audio recorder, etc. Selecting a sound signal type When connecting other equipment to an optical digital audio output, adjust the audio output set- ting accordingly (see page 17). Bitstream When the unit is connected to a processor or amplifier that supports Dolby Digital (5.1ch). LPCM When the unit is connected to the 2-channel audio equipment or an MD recorder, the Dolby Digital does not function. Control Panel Audio Digital Output LPCM Output BitStream 48 kHz Setup Usage: Press ARROW keys to move, ENTER key to change, MENU key to exit.