Sharp DV-AT4000 DV-AT4000 Operation Manual (DVD Player in HT-AT4000) - Page 28

DV-AT4000 Useful operation (continued) " Playing back from the desired point (book- mark) During playback, make bookmarks. Playback can be resumed from the points. Up to six bookmarks can be used per disc. 1 While a disc is playing, press the RANDOM button. Bookmark The bookmark screen is displayed. DVD Operation - Useful operation - " To change the angle You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles. 1 While a disc is playing, press the Angle information ANGLE button. Angle information does not appear if not recorded on the disc. ENG 1/6 CH1 1/2 1/2 Press the ON SCREEN button on the remote control to check angle information (see page 31). 2 Within 3 seconds, press the ANGLE button repeatedly to select the desired angle. Notes: ! Some DVDs prohibit changing the angle. ! Refer to the manual of the disc as the operation may vary depending on the disc. 2 Press the or button to select the desired bookmark number and then press the ENTER button at the desired points. If you enter a wrong point, press the CLEAR button and retry. 3 Press the RANDOM button to exit the bookmark screen. Book mark selections are memorized until a disc is removed or to turn the power off. " To recall book marked position 1 While a disc is playing, press the RANDOM button. 2 Press the or button to select a bookmark number, and then press the / button. Notes: ! The bookmark function is not available for some discs. ! When operating SVCD/VCD with the P.B.C. function, set the sequential play mode to SEQ.2 (see page 30). 28 SHARP 9HX55769150