Sharp DV-AT4000 DV-AT4000 Operation Manual (DVD Player in HT-AT4000) - Page 39

Specifications DV-AT4000 References - Specifications - " Before transporting the unit 1 Set the POWER switch on the main unit to ON. 2 While in the stop mode, press the button. The disc tray will open. Remove a disc. Then press the DISC SKIP button to rotate the tray. and remove the remaining disc(s). 3 Press the button to close the disc tray. Make sure that "NO DISC" is displayed. 4 Set the POWER switch on the main unit to OFF, and then unplug the AC power cord from the AC outlet. " Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (laser pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: Unplug the unit and, after for some time, plug it in again. As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Power source Power consumption Dimensions Weight Signal system Supported disc types Video signal Audio signal Audio output terminals Video output terminals AC 120 V, 60 Hz 16 W Width: 17-5/16" (430 mm) Height: 2-15/16" (86 mm) Depth: 11-1/8" (394 mm) 6.8 lbs. (5.4 kg) NTSC color DVD (Region number 1, ALL), SVCD, VCD, audio CD, CD-R, CD-RW Horizontal resolution: 500 lines S/N ratio: 70 dB Frequency character- Linear PCM DVD: istics 4 Hz to 22 kHz (sampling rate: 48 kHz) 4 Hz to 42 kHz (sampling rate: 96 kHz) CD: 4 Hz to 20 kHz S/N ratio CD: 98 dB (1 kHz) Dynamic range Linear PCM DVD: 95 dB CD: 95 dB Total harmonic distor- 0.005 % maximum tion ratio Coaxial digital output: RCA type 1 Optical digital output: Square type 1 Analog output: RCA type 1 pair (L/R) Video output: RCA type 1 S-video output: S-terminal 1 Component video output: RCA type 3 39