Sharp DV-SL90UA Service Manual - Page 13
Bhow To Eject Manually Method 2
![]() |
View all Sharp DV-SL90UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO EJECT MANUALLY (Method 2) 1 Turn the unit over. 2 Insert the shaft less than a diameter of 3 mm (e.g. screwdriver) straightly into the opening as shown. 3 Turn the shaft along with the opening clockwise. 4 Repeat steps 2 and 3 until the tray will open. 5 Pull the tray slowly with a hand. View for B Rear Turn the shaft along with the opening clockwise. Shaft (e.g. screwdriver) Opening B Front 1-6-4 E592BDC
![](/manual_guide/products/sharp-dvsl90ua-service-manual-a6a376f/13.png)
1-6-4
E592BDC
HOW TO EJECT MANUALLY (Method 2)
1
Turn the unit over.
2
Insert the shaft less than a diameter of 3 mm (e.g. screwdriver) straightly into the opening
as shown.
3
Turn the shaft along with the opening clockwise.
4
Repeat steps 2 and 3 until the tray will open.
5
Pull the tray slowly with a hand.
B
Turn the shaft along with
the opening clockwise.
Rear
Front
Opening
Shaft
(e.g. screwdriver)
View for B