Sharp DV-SL90UA Service Manual - Page 8
Instructions for Handling, Semi-conductors, Ground for Human Body, Ground for Workbench
![]() |
View all Sharp DV-SL90UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Instructions for Handling Semi-conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1MΩ) that is properly grounded to remove any static electricity that may be charged on the body. 2. Ground for Workbench Be sure to place a conductive sheet or copper plate with proper grounding (1MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing. < Incorrect > CBA < Correct > Grounding Band CBA Conductive Sheet or Copper Plate 1-4-4 DVD_NOTE2
![](/manual_guide/products/sharp-dvsl90ua-service-manual-a6a376f/8.png)