Sharp DX-C310 DX-C310 DX-C3400 Operation Manual - Page 563
Paper Type Registration, Auto Tray Switching, Custom Size Registration Bypass
View all Sharp DX-C310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 563 highlights
SYSTEM SETTINGS Paper Type Registration OPERATION PANEL (GENERAL) Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties. Up to 7 paper types can be stored. Item Description Type Name Store any name. The factory default names are "User Type 1" - "User Type 7". Fixed Paper Side Enable this setting when paper with a front and reverse side is used. Disable Duplex Enable this setting when paper is loaded that cannot be used for two-sided printing. Disable Staple Enable this setting when paper is used that cannot be stapled. The settings that can be selected vary depending on the peripheral devices installed. Auto Tray Switching When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of paper is automatically selected and printing continues. Custom Size Registration (Bypass) If you frequently use a special non-standard paper size in the bypass tray, you can store that paper size. Storing the paper size saves you the trouble of setting the size each time you need to use it. Up to three paper sizes can be stored. Select the key ([Custom 1] to [Custom 3]) in which you wish to store or change a paper size. Select whether you wish to enter the size in inches ("Size Input-Inch") or mm ("Size Input-AB"), and then set the X and Y dimensions of the paper. "Size Input-Inch" The X dimension can be set to a value from 5-1/2" to 14". The factory default setting is 11". The Y dimension can be set to a value from 5-1/2" to 8-1/2". The factory default setting is 8-1/2". "Size Input-AB" The X dimension can be set to a value from 140 mm to 356 mm. The factory default setting is 297 mm. The Y dimension can be set to a value from 100 mm to 216 mm. The factory default setting is 210 mm. 6-15 Contents