Sharp FO-4470 FO-4470 Operation Manual - Page 44
Chain Dialing for area and access codes, Editing auto-dial numbers, Clearing auto-dial numbers
View all Sharp FO-4470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Programming Auto-Dial Numbers Chain Dialing for area and access codes You can also program an area code or access code in a Rapid Key or Speed Dial number using the above programming procedure. In Step 9, press 1 to set the number as a Chain Dialing number. After you dial an area code or access code using a Rapid Key or Speed Dial number set for Chain Dialing, the fax machine will wait for you to dial the remainder of the number (you can dial the remainder of the number by pressing a Rapid Key, by pressing the Speed Dial key and entering a Speed Dial number, or by pressing numeric keys). Note that the remainder of the number should not be set as a Chain Dial number if programmed in a Rapid Key or Speed Dial number. ♦ The maximum number of digits that can be dialed at one time by Chain Dialing is 60. Editing auto-dial numbers To make changes in a number previously stored, repeat the programming procedure. Select the Rapid Key or Speed Dial number for which you want to make changes in Step 4, and then change the number(s) and/or name(s) when they appear in the display (Steps 5 and 7). Clearing auto-dial numbers Note: You cannot clear a number if it is used in a program or timer operation, or if it is included in a Group Key. First clear the number from the operation or group, then perform the following clearing procedure. To check where the number is used, print out the Program/Group List or the Timer List as explained on page 116. 1 Press MENU and 3 . Display: 3:ENTRY MODE ENTER #(01-08, , ) 2 Press 0 and 1 . 01: DESTINATION 1=SET, 2=CLEAR 3 Press 2 to select CLEAR. 2: DESTINATION CLEAR ENTER RAPID OR SPEED 42