Sharp FU-21SES Operation Manual - Page 8

PREPARATION Be sure to remove the power plug from the wall outlet. INSTALLING THE FILTERS To maintain the quality of the filters, they are installed in the main unit within polyvinyl bags. Be sure to remove the filters from the polyvinyl bags before using the unit. 1 Remove the filters Front panel 1 Place the unit facing up and remove the front panel Bring up both sides of the front panel bottom to remove the front panel. 2 Remove the filter support Two tabs are pinched, and it is lifted to remove it. Filter support Tabs Tab(2 places) 3 Remove the deodorization filter (gray) and HEPA filter (white) that are inside the polyethylene bags. Deodorization filter HEPA filter INSERTING BATTERIES IN THE REMOTE CONTROL 1 Remove the back cover Press and slide the back cover to remove. 2 Insert batteries Insert batteries with and as shown below. 3 Close the back cover About the batteries • The battery life is about 1 year. Replace the batteries when the remote control becomes inoperative. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take caution of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use AA alkaline batteries (2 units) or AA manganese batteries (2 units).) • When not using the unit or remote control for an extensive period, remove the batteries. This prevents malfunction of the remote control from battery fluid leakage. * The included batteries are for initial use only and may deplete before 1 year. E-6