Sharp FU-21SES Operation Manual - Page 9
Using The Remote Control
View all Sharp FU-21SES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH 2 Install the filter Tabs 1 Remove the HEPA filter from the polyethylene bag and install it in the main unit with the display facing up. Insert so that the tabs on the HEPA filter are facing toward you. Proper operation cannot be achieved when installing the filter backwards. HEPA filter Deodorization filter 2 Remove the deodorization filter from the polyethylene bag and install it in the main unit. Filter support Make sure the tabs on the HEPA filter remain vis- ible. Tab of the up side 3 Install the filter support Tab(2places) of the upside is inserted into the hole part on the body. Next, the tab(2places) of the bot- tom side is pushed. 4 Fill in the usage start date on the replacement label affixed on the back of the front panel and then mount the front panel. Use the date as a guide for the filter replacement period. Replacement label Tab of the bottom side USING THE REMOTE CONTROL • Operate the remote control facing the main unit (receiver). • The signal range is about 7m (front). • Make sure there are no objects blocking the path of the signal. • A sound will be heard from the main unit when a signal is received. Receiver Transmitter NOTE • Avoid strong impact on the remote control. In addition, do not wet the remote control or place it under direct sunlight or near a stove, etc. Malfunction may occur as a result. E-7