Sharp HN-VA401SU HNVA401SU Operation Manual - Page 7
Network Security
![]() |
View all Sharp HN-VA401SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Network Security Network Security To prevent others using nearby power lines from accessing or eavesdropping on your network, only adapters that have been registered are permitted to connect to the network. In addition, the adapters communicate using 128-bit AES encryption. Encryption is automatically enabled when an adapter is registered on your network. (Note that although 128-bit AES encryption provides a high level of security, it does not guarantee 100% protection against unauthorized access to your network.) ♦The adapters in your SHARP PLC adapter kit have been registered at the factory and 128-bit AES encryption has been enabled. ♦In the event that you transfer one of your adapters to another person or send an adapter out for service, it is recommended that you cancel the registration of the adapter (see page 18). ♦If you lose an adapter, it is recommended that you cancel the registration of your remaining adapters (see page 18) and then reregister the adapters. Compatibility with other PLC systems The PLC adapters use the HomePlug® AV 1.1 standard to communicate. The PLC adapters cannot communicate with adapters that use a previous HomePlug standard. However, the PLC adapters can coexist on the same power line with previous HomePlug adapters without mutual interference. The PLC adapters cannot communicate or coexist with adapters that use a standard other than HomePlug AV. The SHARP PLC adapter kit is only for use in the U.S.A. 5
![](/manual_guide/products/sharp-hnva401su-hnva401su-operation-manual-b6a797c/7.png)