Sharp KC-C100U KC-C100U Operation Manual - Page 12

PREPARATION FOR USE Unplug the unit before installing or adjusting the filters. FILTER INSTALLATION To maintain the quality of the filters, they are packed in plastic bags and placed in the unit. Be sure to remove the filters from the plastic bags and replace the filters in the unit before initial use. 1 Remove the filters 1 Remove the Back Panel. Gently push down on the tabs, then tilt and remove the back panel. Tabs on the top 2 Install the filters 1 Install the HEPA Filter. Please make sure that the True HEPA Filter is placed in proper orientation. Installing the filter backwards will affect the performance of the unit. True HEPA Filter Back Panel 2 Remove the Washable Deodorizing Filter (black) and True HEPA Filter (white) from the plastic bags. True HEPA Filter 2 Insert the Back Panel's 2 bottom tabs (left and right) into the small holes in the unit, and slide the Washable Deodorizing Filter between the True HEPA Filter and the Back Panel. Washable Deodorizing Filter Back Panel Bottom tabs 3 Gently push in the upper tabs (left and right) to lock in place. Upper tabs Washable Deodorizing Filter 4 Fill in the usage start date on the Date Label. Use the usage start date as a guide for when the filters should be replaced. Date Label E-10