Sharp KC-C100U KC-C100U Operation Manual - Page 13

Refilling The Water Tank

Page 13 highlights

ENGLISH FRANÇAIS REFILLING THE WATER TANK The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using the Clean Air & Humidify Mode, or the Quick Clean Mode, the Water Tank should be filled with water. 1 Remove the Water Tank by unlatching the top. 2 Remove the Water Tank Cap and carefully fill the Water Tank with tap water. • Change the water in the Water Tank every day with fresh tap water. Tank Cap Tank Handle Water Tank Humidifying Tray Water Tank 3 After filling, securely tighten the Tank Cap. • Check to see that there is no water leaking. • Be sure to wipe off any excess water on the outside of the Water Tank. • When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up. tighten 4 Replace the Water Tank in the unit. • The top latch will "click" in place when the Water Tank is properly installed. ESPAÑOL CAUTION • Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result. • Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur. • Use only fresh tap water. Use of other water sources may promote the growth of mold, fun- gus and/or bacteria. E-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

ENGLISH
FRANÇAIS
ESPAÑOL
REFILLING THE WATER TANK
The unit can be used in the Clean Air Mode without
putting water in the Water Tank. When using the
Clean Air & Humidify Mode, or the Quick Clean Mode,
the Water Tank should be filled with water.
2
1
3
Remove the Water Tank by unlatching the
top.
Remove the Water Tank Cap and care
-
fully fill the Water Tank with tap water.
• Change the water in the Water Tank every day with
fresh tap water.
After filling, securely tighten the Tank Cap.
• Check to see that there is no water leaking.
• Be sure to wipe off any excess water on the outside of
the Water Tank.
• When carrying the Water Tank, hold it with both hands
so that the Water Tank opening is facing up.
Replace the Water Tank in the unit.
• The top latch will “click” in place when the Water Tank
is properly installed.
4
CAUTION
Tank Handle
Water Tank
Tank Cap
Water Tank
E-11
Humidifying
Tray
tighten
• Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
• Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or
other damaging substances, deformation and/or malfunction may occur.
• Use only fresh tap water. Use of other water sources may promote the growth of mold, fun
-
gus and/or bacteria.