Sharp KC-C100U KC-C100U Operation Manual - Page 23

ERROR DISPLAY If error occurs again, contact the Sharp Service Center. LAMP INDICATION ERROR DETAILS Flashing of the Fan Speed Indicator Light 'AUTO' or the 'QUICK CLEAN' Light. Problem in circuit board Flashing of the Humidity Indicator Light '30'. Abnormal temperaturehumidity sensor Flashing of the Humidity Indicator Light '70'. Flashing of the Fan Speed Indicator Light Abnormal fan motor 'LOW'. REMEDY Unplug the unit, wait one minute, and plug the unit in again. Turn power OFF to cancel the error display, wait one minute, and then turn power ON. Flashing of the Clean Air & Humidify Indicator Light. Abnormal humidity filter Verify if the Humidifying Filter, Humidifying Tray and Water Tank are properly installed and then turn power ON again. ENGLISH FRANÇAIS ESPAÑOL SPECIFICATIONS Model Power supply Operation Mode Fan Speed Adjustment Fan Speed CFM(m3/min) Rated Power(W) Noise Level(dBA) Humidification(pints/hour)*2 Recommended Room Size(sq.ft)*1 CADR (Dust/Smoke/Pollen) Water Tank Capacity(gallon) Sensors Filter type Dust collection Deodorization Cord Lenght Dimensions Weight MAX 194(5.5) 50 51 CLEAN AIR MED 88(2.5) 9 34 KC-C100U 120V 60Hz LOW CLEAN AIR & HUMIDIFY MAX MED LOW 28(0.8) 194(5.5) 88(2.5) 49(1.4) 3.5(3.0) 50 17 51 11 6.6(6.3) 34 23 1.3 0.7 0.5 254 164/164/174 0.96 Dust/Temperature & Humidity True HEPA with Microbial control Washable Deodorizing 6.5 ft (2.0m) 14-7/8in(W)×10-1/2in(D)×23in(H) 378mm(W)×265mm(D)×586mm(H) 20.7 lbs(9.3kg) *1 •The Recommended Room Size is appropriate for operating the unit at maximum fan speed. *2 •Humidification Amount changes in accordance with indoor and outdoor temperature and humidity. Humidification Amount increases as temperatures rise or humidity decreases. Humidification Amount decreases as temperatures decrease or humidity rises. •Measurement Condition : 68ºF(20ºC), 30% humidity (JEM1426) Standby Power In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes about 0.4W of standby power. For energy conservation, unplug the power cord when the unit is not in use. E-21