Sharp LC-26DV20U Operation Manual - Page 41

Watching the DVD Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching its surface, align it with the guides, and place it in position. On the screen, "A" changes to "Reading" and then playback will commence. • A menu screen appear on the TV screen, if the disc has a menu feature. In this case, press A/ Y/_/_. or ENTER to operate a menu feature. Press DISPLAY. The status display of the disc will appear on the screen in order like the figure below, DVD _' Title elapsed playing time Play status total time Title number Chapter No _' Subtitle language _' Type of audio Press STOP to end playback. • The unit memorizes the stopped point, depending on the disc. "_" appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again ("l" appears on the screen) or unload the disc, the TV/DVD will clear the stopped point. Press EJECT. Remove the disc and then press POWER. The TV/DVD turns off. When you eject the disc, you may hear mechanism noise, but it is not malfunction. Audio CD Disc oF Track number 4 Display Off angle Audio language Track elapsed playing time total time • When you play a CD disc, the status display will appear and remain on the screen. If the TV/DVD does not operate properly: Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • If a non-compatible disc is loaded, "incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 6 and 52). • Some discs may take a minute or so to start playback. • When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY. • A "Prohibition" symbol "'_" may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD. • When you set a single-faced disc label downwards (i.e. the wrong way up) "Reading" will appear on the display and then "incorrect Disc" will be displayed. • Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs. Q- 41