Sharp LC-32GP3U-R LC-32GP3U Operation Manual - Page 18

Preparation Connecting HDMI equipment You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment. HDMI equipment HDMI cable (commercially available) NOTE • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6. • To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using an HDMI cable and set the equipment to 1080p output. Connecting a PC When connecting to a PC with an analog RGB terminal. (INPUT 7) RGB cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) PC When connecting to a PC with an HDMI terminal. (INPUT 4, 5 or 6) HDMI cable (commercially available) PC NOTE • The HDMI terminals only support digital signal. PC compatibility chart It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 40 to set PC input signals. PC Resolution Horizontal Frequency Vertical Frequency VESA Standard VGA 720 x 400 640 x 480 31.5 kHz 31.5 kHz 37.9 kHz 37.5 kHz 70 Hz 60 Hz 72 Hz 75 Hz * O O O SVGA 800 x 600 PC XGA WXGA 1024 x 768 1360 x 768 35.1 kHz 37.9 kHz 48.1 kHz 46.9 kHz 48.4 kHz 56.5 kHz 60.0 kHz 47.7 kHz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz O * O O O * O O O O SXGA 1280 x 1024 64.0 kHz 60 Hz O SXGA+ 1400 x 1050 64.0 kHz UXGA 1600 x 1200 75.0 kHz *These 4 formats are not supported by the analog RGB terminal. 60 Hz 60 Hz O * O DDC is a registered trademark of Video Electronics Standards Association. Power Management is a registered trademark of Sun Microsystems, Inc. VGA and XGA are registered trademarks of International Business Machines Corp. 16