Sharp LC-32GP3U-R LC-32GP3U Operation Manual - Page 51
How to temporarily release the V-CHIP BLOCK, Reactivating the temporarily released V-CHIP BLOCK
UPC - 074000370821
View all Sharp LC-32GP3U-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Useful adjustment settings How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. 1 Press ENTER while the V-CHIP is working, and then the secret number setting menu displays. 2 Input the 4-digit secret number by using 0- 9. At this time V-CHIP BLOCK temporarily releases. Reactivating the temporarily released V-CHIP BLOCK You can reactivate the temporarily released V-CHIP BLOCK as shown below. Method 1: Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 43.) Method 2: Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to reactivate BLOCK. (See pages 46 and 49.) Method 3: Switch off the TV power. NOTE • Performing any of the three above will activate the V-CHIP BLOCK. Digital Setup This setting allows you to optimize the settings of Digital broadcasting. Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. 1 Press MENU to display the MENU screen, and then press c/d to select "Digital Setup". 2 Press a/b to select "Audio Setup", and then press ENTER. 3 Press a/b to select "PCM" or "Dolby Digital", and then press ENTER. PCM Dolby Digital Selected item Description PCM The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". Dolby Digital The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital. 4 Press MENU to exit. Identification 1 Press MENU to display the MENU screen, and then press c/d to select "Digital Setup". 2 Press a/b to select "Identification", and then press ENTER. The current version of the TV software is displayed. 49