Sharp LC-45GD5U LC-45GD5U Operation Manual - Page 65

Useful adjustment settings Input signal (for PC input mode) • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again. 640g400 640g480 1024g768 720g400 848g480 1280g768 3 Press a/b to select "3D Noise Reduction", and then press ENTER. 4 Press a/b to select the desired level, and then press ENTER. Off High Low NOTE • You can only select the "Input Signal" on the Setup menu when receiving one of the 6 input signals listed above. Mosquito Noise Reduction Reduces fine detail mosquito noise. 1 Repeat steps 1 and 2 in 3D Noise Reduction. 2 Press a/b to select "Mosquito Noise Reduction", and then press ENTER. 1 Press MENU and the MENU screen displays. 3 Press a/b to select the desired level, and then press ENTER. Selected item Description 2 Press c/d to select "Setup". Off High For normal images For enhanced Mosquito Noise Reduction Low For moderate Mosquito Noise Reduction 3 Press a/b to select "Input Signal" and then press ENTER. Audio Only 4 When listening to music from a music program, you Press a/b to select the desired input signal can set the Liquid Crystal display off and enjoy audio on the display. only. Example 640 x 480 848 x 480 1 Repeat steps 1 and 2 in 3D Noise Reduction. 2 Press a/b to select "Audio Only", and then press ENTER. 3D Noise Reduction Produces a clearer video image. 1 Press MENU and the MENU screen displays. 3 Press c/d to select "On", and then press ENTER. Selected item Description On Audio is output without screen image. Off Both screen images and audio are output. 2 Press c/d to select "Option". 65