Sharp LC-45GD5U LC-45GD5U Operation Manual - Page 75
Other viewing options
View all Sharp LC-45GD5U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Other viewing options Viewing information of the program You can view information about a program you are currently watching. 2 Update the still image by pressing ENTER. • Each time you press ENTER, the image on the right screen updates. 3 Press FREEZE to exit still image. NOTE • This function does not work in INPUT 4 (HDMI) and INPUT 5 (DVI-I). • When this function is not available, "No displaying still 1 Press INFO while watching a broadcast. image available" will display. • The still image is automatically erased after 30 minutes. • Information of the current program will be • If you are using freeze function and a broadcast activates displayed. the V-CHIP BLOCK, freeze function will be cancelled and a V-CHIP BLOCK message will appear. PBS WGBH-HD 2.1 American Family - - - Journey of Dreams 20:00 21:00 Sample program information Presetting remote control function • If the program you are receiving is copyprotected, an icon will be displayed in the program information. Recording digital programs via i.LINK, or recording digital audio via digital audio output terminals, is restricted. You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit. Icon Description Digital copying prohibited One digital copy only NOTE • Sometimes the name of the program is not broadcast. In that case, the program name will not be displayed. Picture and still image You can display two same-sized pictures - one moving and one still. Presetting manufacturer codes 1 Press FUNCTION until the LED for your device lights up. 2 After the LED for your device lights up, if you press FUNCTION and DISPLAY and enter the code registration mode, the LED will blink. 1 Press FREEZE. • A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE. 3 Press 0 - 9 to enter the manufacturer code. (See page 76.) • Preset mode is finished once the LED no longer lights up. 4 After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.) FREEZE 75