Sharp LL-S242A-W Operation Manual - Page 26

Monitor Settings SETUP Menu Details Menu Position Position When the monitor is used in portrait orientation (power/menu button on the top), this icon moves the display position of the menu screen to the bottom of the screen. Mode Mode Normal This mode is suited to normal PC screen display. Pen Writing This mode is suited to pen writing position. Game This mode is suited to video games. Multimedia This mode is suited to video playback. User The user can adjust the image quality. Brightness Brightness This icon adjusts the brightness of the backlight. Other Other Video input RGB Range This setting configures the range of the RGB input signal. Use "Auto" for normal operation. If the range cannot be set correctly in "Auto", adjust to match the video. Varying the setting may cause floating blacks or reduced gradations to appear. DisplayPort Mode This setting configures the DisplayPort mode. Use "DisplayPort Mode1" for normal operation. If the following symptoms occur in "DisplayPort Mode1", set the mode to "DisplayPort Mode2". • The video is interrupted, flickers, or is not displayed. Signage Set to "ON" if using the monitor in a signage application (controlled using e-Signage (optional)). Mode on Start Up Touch Mode This setting configures the touch action mode (See page 25) used when the monitor is turned on. Reset: The monitor starts in finger/pen mode. Save: The monitor starts in the mode that was last used. Menu Position This setting is used to set the position of the menu at startup. Reset: Sets the display position of the menu at startup to "Bottom in Portrait Orientation". Save: Sets the position to that when power was last turned off. Pen Position Adjustment This setting adjusts the pointer position if the pen tip position is different than the pointer indicator position. Display Settings Mark Indicators Touch mark: This setting configures how to display the touch mark (See page 28). Key Mark: This setting configures how to display the key mark (See page 28). Mark Position: This setting configures the display position of the status display mark (touch mark/key mark) on the screen. LED Status This mark toggles the power LED on/off. TEMPERATURE ALERT Selects the notification method for an abnormal temperature. OSD & LED: When an abnormal temperature is detected, the power LED flashes in red and green alternately and the screen displays a message: TEMPERATURE. LED: When an abnormal temperature is detected, the power LED flashes in red and green alternately. OFF: Do not notify about an abnormal temperature. Logo Screen This setting configures whether or not to display the logo screen during startup. Language Language This setting changes the menu screen display language. Reset Reset This setting resets all settings to their factory default. E 26