Sharp MT821 Operation Manual - Page 15
To interrupt a synchro recording, To stop recording, Recording from the microphone, Mic manual
UPC - 074000410473
View all Sharp MT821 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6 When a sound, such as a person speak- ing, is picked up by the microphone, recording will begin automatically. 0 If a silence lasts for 3 seconds or more, the recording will be paused automatically. However, the unit will not pause for about the first 10 seconds after recording has started. To interrupt a synchro recording: Press the ,I1 button while recording. 0 The Mic synchro recording mode will be canceled, and the unit will enter the recording stand-by mode. 0 To resume synchro recording, press the ENTER/SYNC button again. To stop recording: Press the U:OFF button. W Recording from the microphone (Mic manual recording) 0 You can start recording manually (anytime you like). 1 Put the unit in the recording stand-by mode. (Perform steps 1 -- 4 in the "Mic 2 synchro recording" section.) Press the ,I! button. 0 Recording will start. To interrupt a recording: Press the ,I1 button while recording. 0 The unit will enter the recording stand- by mode. 0 To resume recording, press the )!I but- ton again. The track number will be increased by one each time you interrupt a recording. To stop recording: Press the U:OFF button. Notes: 0 If you want to use a microphone, be sure it is a plug-in-power type microphone. l When a plug-in-powertype microphone is plugged in, the main unit will provide power for the microphone's operation. l If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. 0 Insert the plug firmly. If you don't, the recording will not be made properly. 0 Use a microphone with a 1/8"(3.5 mm) diameter stereo mini plug. 0 While making a mic recording, do not connect anything to the LINE IN jack on the main unit. 14