Sharp MT821 Operation Manual - Page 31

n To change disc names or track names Some MiniDiscs created on other equipment may have more than 100 characters in a track name or disc name. The characters from the 101 st character and on cannot be corrected or changed. To delete characters: 1 Put the unit in the character input mode. 0 To delete characters in a disc name, perform steps 1 - 2 on page 28. 0 To delete characters in a track name, perform steps 1 - 3 on page 29. 2 Press the VOL + or VOL - button to move the cursor to the character you want to delete. 3 Press the BASS button. 0 The character will be erased. 4 Press the EDIT button. To add characters: 1 Put the unit in the character input mode. 0 To add characters to a disc name, perform steps 1 - 2 on page 28. l To add characters to a track name, perform steps 1 - 3 on page 29. 2 Press the VOL + or VOL - button to move the cursor to the right of the character, where you want to add a new character. 3 Preform steps 3 - 5 in the "Disc name" section. 4 Enter the new character you want, and press the EDIT button. n Name/stamp Master MiniDisc (Prerecorded 2. The character information, such as the disc name and track names is transferred MiniDisc I 1 Record the sound from the master MiniDisc onto a recordable MiniDisc. Playback unit Recording unit Master MiniDisc Recordable MiniDisc 0 Refer to the standard recording method. (Pages 8 - 14) 0 At this point, only the sound is recorded. No character information is transferred. 0 Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 27 - 28) l This function can not be performed from playback only MiniDiscs. 2 When the recording is complete, remove the newly recorded MiniDisc and load the master MiniDisc into the MD-MT821. 0 Do not mistake the master MiniDisc for the newly recorded MiniDisc. 30