Sharp MT821 Operation Manual - Page 16

u Creating marks while making a mic recording (Timed auto mark function) Marks can be created at a fixed interval (every 5 minutes is the default setting) so that the beginning of any track can be found. The interval at which marks are created can be changed by the user. While in the recording stand-by mode or while recording, press the EDIT button. Each time the button is pressed, the setting will change as follows: I (A mark is created every 5 minutes.) About the timed auto mark: Whenever a recording begins, a track number will be created automatically. 0 - : Track number which is created when a silence lasts for 3 seconds or more during synchro recording. 0 - - - : Track number which is created bv the timed auto mark function. Example when the setting is for "5 minutes": 1 When making a mic synchro recording 1 Track number 1 I. Track Track Track Track :. number 2 number 3 number 4 number 5 I > A A 1 If a silence lasts for 3 seconds or 1 more, a timed auto mark will be created 5 minutes after the previ- ously created track number.. (A mark is created every 10 minutes.) The time between marks may vary slightly when compared with the actual recording time. When making a mic manual recording Track number 1 ! ,Track number 2 I Track number 3 t I I Track number 4 I I 5 minutes 5 minutes 5 minutes 0 A timed auto mark will be created ev- ery 5 minutes. When the timed auto mark setting has beenchanged Track number 1 ,I Track number 2 II 3 minutes 10 minutes 10 minutes When the setting is changed to 10 minutes while recording, a timed auto mark will be created 10 minutes after [ the change is made. 15