Sharp MX-3111U MX-3111U Software Setup - Page 14

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER X Advanced installation With the advanced installation, you can select the printer driver to be installed. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below. When Sharp Advanced Printing Language-c driver is installed, this installation is not performed. 1 Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. 3 Printers connected to the network are detected. Select the machine and click the [Next] button. * The above screen appears when using the "Disc 1" CD-ROM. 2 Click the [Advanced installation] button. • If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button. • You can also click the [Specify condition] button and search for the machine by entering the machine's name (host name) or IP address. ☞ Checking the IP address of the machine (page 7) 4 A confirmation window appears. Check the contents and then click the [Next] button. When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below. • Machine connection method: LPR Direct Print (Auto Search) • Set as default printer: Yes (excluding the PC-Fax driver) • Printer driver name: Cannot be changed • PCL printer display fonts: Installed If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and click the [Next] button. If you selected other than [LPR Direct Print (Auto Search)], see the following pages: • LPR Direct Print (Specify Address): page 14 • IPP: page 16 • Shared printer: page 22 • Connected to this computer: page 18 12