Sharp MX-6071 MX-2651 MX-3051 MX-3551 MX-4051 MX-3071 MX-3571 MX-4 - Page 20

Touch Panel Operation Changing the job order If there is a job in progress, an interrupt job can be performed, or a job can be moved down in the queue to change the job order. Tap the key of the job you want to move, and tap the "Priority Change" key. Print Job Job Queue Copy Copy Scan Fax Progress / Sets 0050/0050 0000/0100 Internet Fax Status Paper Empty Waiting Priority Change Spool Job Queue Complete • key Moves the selected job to the top of the queue. The current job will be interrupted and the selected job starts. • key Moves the selected job up one position. When the second job from the top is selected, tapping this key interrupts the current job and starts the selected job. • key Moves the selected job down one position. • key Moves the selected job to the bottom of the queue. Scanner job with a timer setting When a scanner job with a timer setting is selected, tapping the order change keys moves the job as follows. • key The timer setting is canceled and the job moves to the position after the job in progress (second from top). • key The timer setting is canceled and the job moves to the lowest position in the queue (if there are 3 jobs, the 4th position) • , key These keys cannot be used. The jobs below cannot be moved. Job currently in progress, interrupt copy jobs, list print jobs, and jobs when Passing Prohibited is set in the system settings. Disabling of Bypass Printing In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Disabling of Bypass Printing]. This setting is used to disable bypass printing (printing other jobs ahead of a job that has been stopped* because the paper required for the job is not available in any of the trays). * This does not include cases where the paper ran out during the job. 20