Sharp MX-B402SC Starter Guide - Page 23
Loading paper in a tray
View all Sharp MX-B402SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CHANGING PAPER IN A TRAY Loading paper in a tray A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 to A4) can be loaded in trays 1 and 2. A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2" to size 8-1/2" x 14" (B5 to A4) can be loaded in trays 3 and 4. Gently pull out the paper tray. If paper remains in the tray, remove it. Move the two guides on the tray. Load the paper so that it is not as shown below when viewed from the front and side of the machine. The loaded paper should not go higher than these protrusions. Insert the paper with the print side face up. Fan the paper well before inserting it. Indicator line The indicator line indicates the maximum height of the paper that can be loaded in the tray. When loading paper, make sure that the stack is not higher than the indicator line. For detailed information, see "TRAY SETTINGS FOR TRAY 1 TO 4" in "Chapter 1 BEFORE USING THE MACHINE" in the Operation Guide. 21