Sharp MX-B450P MX-B350P MX-B450P Software Setup Guide - Page 3

Table of contents  Windows / Select the software to be installed Printer driver / PC-Fax driver* Page 4 Printer Status Monitor Page 16 Scanner driver* Page 17 *Depending on the model, you cannot install PC-Fax driver and Scanner driver. System requirements Before installing the software described in this manual, make sure that your computer satisfies the following requirements. Operating system* Computer type Windows 7, Windows 8.1, Windows 10 Windows Server 2008, Windows Server 2012, Windows Server 2016 IBM PC/AT compatible computer Equipped LAN board Display 1024 x 768 dots resolution and 16-bit color or higher is recommended. Other hardware requirements An environment that allows any of the above operating systems to fully operate. * The Windows OS Starter Edition and Embedded Edition are not supported. Other editions and service packs are supported, however, it is recommended that service packs be updated to the newest available version. Including the 64-bit edition OS. • To perform the procedures described in this manual such as installing the software and configuring settings after installation, administrator authority is required. Related topics Printer driver: These allow the machine to be used as a printer. Printer Status Monitor: This allows you to monitor the status of the machine on your computer screen. Scanner driver (TWAIN driver): This allows you to use the scanner function of the machine from a TWAIN-compliant software application. PC-Fax driver: This enables you to send a file from your computer as a fax using the same procedure as when printing the file. (When the fax option is installed.) Even if the fax* function is not installed, the PC-Fax driver can be updated using the CD-ROM in the Internet fax expansion kit to enable you to send a file from your computer as an Internet fax* in the same way as you print a file. * Some models may not be able to use the fax or the Internet fax function. 3