Sharp MX-C311 MX-C311 MX-C401 Operation Manual Suite - Page 26
levers in the direction of the arrows to lock the cover. - developer
View all Sharp MX-C311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
REPLACING SUPPLIES AND MAINTENANCE Hold the developer cartridge with one hand and slowly remove the seal with the other hand. Slowly pull the seal straight and horizontally out. 8 If excessive force is used or the seal is pulled out diagonally, it may tear. There is a mark (red belt) on the end of the seal. After removing the seal, be sure to verify that the mark (red belt) is on the end of the seal. If the seal has been cut on the developer cartridge, the cartridge cannot be used. Replace with a new developer cartridge. Close the main charger cover and rotate the lock levers in the direction of the arrows to lock the cover. When the lock levers are vertical, the cover is locked. 9 23
23
REPLACING SUPPLIES AND MAINTENANCE
8
Hold the developer cartridge with one hand and
slowly remove the seal with the other hand.
Slowly pull the seal straight and horizontally out.
If excessive force is used or the seal is pulled out diagonally, it may tear.
There is a mark (red belt) on the end of the seal. After removing the
seal, be sure to verify that the mark (red belt) is on the end of the seal.
If the seal has been cut on the developer cartridge, the cartridge cannot
be used. Replace with a new developer cartridge.
9
Close the main charger cover and rotate the lock
levers in the direction of the arrows to lock the cover.
When the lock levers are vertical, the cover is locked.