Sharp MX-C311 MX-C311 MX-C401 Operation Manual Suite - Page 41
To clean the rollers, wipe each roller with a clean, cloth., Attach the roller cover on the bypass
View all Sharp MX-C311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
REPLACING SUPPLIES AND MAINTENANCE To clean the rollers, wipe each roller with a clean cloth. 3 Caution When cleaning the rollers, be careful not to injure your hands. Do not touch the surface of the roller if your hands are dirty. • When you replace roller, go to the next step. • If the dirt is difficult to remove, moisten the cloth with a small amount of water or neutral detergent, and then wipe with a clean, dry cloth until no moisture remains. Attach the roller cover on the bypass tray. (1) Tilt the front of the cover slightly to attach it. (2) Press the cover onto the bypass tray so that it locks into place. 4 (1) (2) 38
38
REPLACING SUPPLIES AND MAINTENANCE
3
To clean the rollers, wipe each roller with a clean
cloth.
Caution
When cleaning the rollers, be careful not to injure your hands.
Do not touch the surface of the roller if your hands are dirty.
• When you replace roller, go to the next step.
• If the dirt is difficult to remove, moisten the cloth with a small amount
of water or neutral detergent, and then wipe with a clean, dry cloth
until no moisture remains.
4
Attach the roller cover on the bypass tray.
(1)
Tilt the front of the cover slightly to attach it.
(2)
Press the cover onto the bypass tray so that it locks
into place.
(1)
(2)