Sharp MX-M264N Operation Guide - Page 390
Set the time with the, keys., Press the [START] key.
View all Sharp MX-M264N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
FACSIMILE (1) Fax/Special Modes Timer (2) (3) OK Cancel OK Day of the Week --- Time 10 hh. 00 mm. 4 Set the time with the keys. (1) Specify the day. If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. (2) Specify the time (hour, minute) Select the time in 24-hour format. You can also directly touch a numeric display key to change the setting with the numeric keys. (3) Touch the [OK] key. When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure. CHECKING THE DATE AND TIME (page 4-6) Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. 5 A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. • The time can be specified up to a week in advance. • Up to 94 timer transmissions can be stored at once. • Only one timer polling operation can be stored at once. If you wish to poll multiple machines, store a serial polling timer operation. • If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission is finished. • Other operations can be performed after a timer transmission is set up. • This function cannot be used in direct transmission mode or when the speaker is used to dial. • If a timer transmission is given priority in the job status screen, the time specification is cancelled. The transmission will begin as soon as the job in progress is completed. GIVING PRIORITY TO A RESERVED FAX JOB (page 4-135) To cancel timer transmission... Touch the [Cancel] key in the screen of step 4. 4-80 Contents