Sharp MX-M264N Operation Guide - Page 483
Sending An Image In Usb Memory Mode
View all Sharp MX-M264N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. • Use a FAT32 USB memory with a capacity of no more than 32 GB. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below. Connect the USB memory to the USB connector (Type A) on the machine. 1 Original size detector Place the original. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. • When placing the originals, orient them as shown below. Originals Portrait orientation* Document feeder tray Place the original face up. Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. 2 1 1 1 1 Landscape orientation 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4. • Place A5 (5-1/2" x 8-1/2") size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For a A5R (5-1/2" x 8-1/2"R) size original, enter the original size manually. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 5-35 Contents