Sharp MX-M264N Operation Guide - Page 792

TROUBLESHOOTING Problem Stapling does not take place. Point to check Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? Have functions been disabled by the administrator? The stapling position is not correct. Is the stapling position set correctly? Sheets output to the delivery tray of the finisher are scattered. Have the output sheets got folded? The stapled sheets are scattered. Have the output sheets got folded? Solution Check the paper type settings in the machine and select a tray that has paper that can be used for stapling*. Click the [Tray Status] button in "Paper Selection" on the [Paper] tab of the printer properties window and check the paper type setting of each tray. * Stapling is not possible on labels, tab paper, transparency film, glossy paper or envelopes. In addition, if "Disable Staple" is selected in the user type, stapling will not be possible. Check with your administrator. Some functions may have been disabled in the system settings (administrator). Check the stapling position setting. 2. COPIER "OUTPUT" (page 2-31) If the front and back side of the sheets in the paper feed tray have been reversed, in some cases it can be improved. If the front and back side of the sheets in the paper feed tray have been reversed, in some cases it can be improved. 8-46 Contents