Sharp MX-M753 Starter Guide - Page 46

SPECIFICATIONS Machine specifications / copier specifications (Continued) Tray 4 Paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, A3, B4, A4, A4R, B5, B5R, 8K, 16K, 16KR (Includes automatic paper size detection function.) Paper weight: Plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)), heavy paper (28 lbs. bond to 110 lbs. index (106 g/m2 to 209 g/m2) Paper capacity: Plain paper (21 lbs. (80 g/m2)) 500 sheets, heavy paper 80 sheets Paper types: SHARP-recommended plain paper, recycled paper, colored paper, and heavy paper*2 Bypass tray Paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR (Includes automatic paper size detection function. Entry of paper sizes up to 11-5/8" x 17" (297 mm x 432 mm) is possible.) Paper weight: Thin paper (15 lbs. to 16 lbs. (56 g/m2 to 59 g/m2)), plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)), heavy paper (28 lbs. bond to 110 lbs. index (106 g/m2 to 209 g/m2)) Paper capacity: Standard paper 100 sheets Paper types: SHARP-recommended plain paper, recycled paper, colored paper, heavy paper*1, thin paper, transparency film*1, labels*1, and tab paper*1 Duplex module Paper sizes: Paper weight: Paper types: 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR Plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)), heavy paper (28 lbs. bond to 110 lbs. index (106 g/m2 to 209 g/m2)) SHARP-recommended plain paper, recycled paper, colored paper, and heavy paper Output tray (Center tray) Output method: Face-down output Output capacity: 250 sheets (using SHARP-recommended 8-1/2" x 11" or A4 paper) (The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper.) Tray full sensor: Yes Interface port LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T USB connectivity: Type A connector supports USB 2.0*3 Compatibility requirements of USB memory Disk Format: FAT Type B connector supports USB 2.0 (Hi speed) Required power supply AC 120 V ±10% 60 Hz Power consumption 1.8kW Dimensions 28-42/64" (W) x 26-57/64" (D) x 47-48/64" (H) (728 mm (W) x 683 mm (D) x 1213 mm (H)) Weight Approx. 419 lbs. (190 kg) Overall dimensions 40-25/64" (W) x 26-57/64" (D) (1026 mm (W) x 683 mm (D)) (when bypass tray is extended) *1 The following paper sizes can be used: 8-1/2" x 11", A4, B5, 16K, Custom size (only 8-1/2" x 11", A4 for tab paper) *2 The following paper sizes can be used: 8-1/2" x 11", A4, B5, 16K *3 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors. Do not use the connectors simultaneously. To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed 500 mA. 44