Sharp PG-M15X PG-M15S , PG-M15X Operation Manual - Page 33

Operation Picture Adjustments Projector 1,5 2,3 2,3,4 Remote control (GUI) On-screen Display INPUT 1 (RGB) Mode Contrast 0 Picture Bright 0 Fine Sync Red 0 Options Blue 0 Language CLR Temp High Reset PRJ Mode END SELECT BACK ENTER INPUT 1 (COMPONENT) Mode Contrast 0 Picture Bright 0 Options Color 0 Language Tint 0 PRJ Mode Sharp 0 Red 0 Blue 0 CLR Temp High Reset END SELECT BACK ENTER INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) Mode Contrast 0 Picture Bright 0 Options Color 0 Language Tint 0 PRJ Mode Sharp 0 Red 0 Blue 0 CLR Temp High Reset END SELECT BACK ENTER Adjusting the Picture You can adjust the projector's picture to your preferences with the following picture settings. Description of Adjustment Items Selected item Contrast Bright Color Tint Sharp Red Blue Reset ƒ button ∂ button For less contrast For more contrast For less brightness For more brightness For less color intensity For more color intensity Skin tones become purplish Skin tones become greenish For less sharpness For more sharpness For weaker red For stronger red For weaker blue For stronger blue All image adjustment items are returned to the factory preset settings. • These adjustments do not work in INPUT 1 (DVI) mode. • "Color", "Tint" and "Sharp" do not appear in INPUT 1 (DVI) or (RGB) mode. 1 Press MENU. 2 Press ∂/ƒ to select "Picture", and then press ENTER. 3 Press ∂/ƒ to select a specific adjustment item, and then press ENTER. The items except the selected one will be displayed in gray. 4 Press ∂/ƒ to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. • To reset all adjustment items, select "Reset", and then press ENTER. 31