Sharp PG-M15X PG-M15S , PG-M15X Operation Manual - Page 35

Computer Image Adjustments (INPUT 1 (RGB) mode only) Projector Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing AUTO SYNC. 1 1 Press AUTO SYNC. Operation Remote control On-screen Display During Auto Sync adjustment, "Adjusting The Image" is displayed as shown on the left. • Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See the steps below.) Projector 1,5 2,3 2,3,4 Remote control (GUI) On-screen Display Picture Clock 0 Phase 0 Fine Sync H-Pos 0 Options V-Pos 0 Language Signal Info PRJ Mode END SELECT BACK ENTER Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image. Description of Adjustment Items Selected item Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centers the on-screen image by moving it to the left or right. Centers the on-screen image by moving it up or down. • Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See the step above for details. (Select the desired computer input mode with INPUT.) 1 Press MENU. 2 Press ∂/ƒ to select "Fine Sync", and then press ENTER. 3 Press ∂/ƒ to select a specific adjustment item, and then press ENTER. 4 Press ∂/ƒ to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. 33