Sharp R-1500 R-1500 , R-1501 , R-1502 Microwave Operation Manual - Page 8

UNPACKING AND INSTALLATION INSTRUCTIONS 5 TOOLS RECOMMENDED FOR INSTALLATION • Phillips Screwdriver • Electric Drill • 1/2", 5/8" and 3/32" Drill Bits • 1-1/2" Wood Bit or Metal Hole Cutter (if metal cabinet is used) • Saw to cut exhaust opening (if needed) • Protective Drop Cloth for product and range - you may also use carton for protection • Scissors • Pencil • Measure • Tape 6 INSTALLATION HARDWARE The INSTALLATION HARDWARE items 1 - 7 are in a small bag. Items 8 - " are packed separately. All items are in a small carton packed below the oven. ITEM NAME QUANTITY 1 Wood Screw 5 X 30 mm 6 2 Toggle Bolt with nuts #10 - 24 X 50 mm 4 3 Top Cabinet Screw 5 X 60 mm 2 4 Power Cord Hanger 1 5 Tapping Screw 4 x 12 mm 3 6 Flat Washer 30 mm diameter 2 7 Grommet 1 8 Rear Cushion 1 9 Exhaust Damper Assembly 1 ! Scale Plate 2 " Grease Filter 2 PART CODE XTSSD50P35000 LX-BZ0195WRE0 XBRSD50P60000 LX-MZB001MRE0 XOTSD40P12000 XWHSD50-16300 LBSHC0040MRE0 PCUSUB059MRP0 FFTA-B005MRK0 LANG-B002MRP0 PFIL-B002MRE0 Figure 4 Parts shown not to common scale. 8