Sharp R-CD1800M R-CD1200M , R-CD1800 , R-CD-2200M Operation Manual - Page 9
Before Operation, Memory Operation
View all Sharp R-CD1800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BEFORE OPERATION * Before operating your new oven, make sure you read and understand this operation manual completely. 1) Plug in the oven. * The digital display will then show " . " 2) Control panels can only be operated when the door is closed. 3) Oven light will go on for 1 minute when the door is opened. Cancellation: 1. Cooking data is canceled when keys are not pressed for more than three minutes when setting programming. 2. Cooking stops when the STOP/CLEAR pad is pressed and cooking data remains. However if subsequent keys are not pressed within three minutes, cooking data will be canceled. To resume cooking press the START pad. 3. Cooking stops when the door is opened and cooking data remains. However once the door is closed, cooking data will be canceled if subsequent keys are not pressed within 3 minutes. To resume cooking press the START pad. 4. Cooking is immediately canceled by pressing the STOP/CLEAR pad twice. Checking food: Press the STOP/CLEAR pad then open the door, check food, close the door and press the START pad to continue cooking. Cooking Completion: When food is not taken out after cooking completion, End will be shown in the display until the food is taken out. HELPFUL TIPS for the Memory Input Method The Memory Input Method determines how to input memory numbers for Memory Cooking and Custom Help and Saving memories, therefore follow the method below. Refer to HELPFUL TIPS below as well as in Memory cooking. 1. Dual Digit Input: Must input two numbers to select a The Memory Input Method memory, even though the first number is 0. Memory Memory No. programming is limited to 0 - 99. 2. Single Digit Input: Can only input one number to select Memory Examples 0 a memory. Memory programming is limited to 0 - 9. Input Method 2 12 22 3. Repeat Digit Input: Input one, two, or three numbers Dual Digit Input 0, 0 0, 2 1, 2 2, 2 to select a memory. Memory programming is limited to 0 - 29. Single Digit Input 0 2 4. For Repeat Digit Input/Auto Start ON only, push number Repeat Digit Input 0 2 2, 2 2, 2, 2 pads within one second of the previous number. 5. Regardless of Input Method selected, Counter Check/Clear (Custom Help 7) and Multiplication Factor for Double/ Triple Quantity (Custom Help 10) only use the Dual Digit Input Method. As for Custom Help 10, enter memory number after pressing the DOUBLE/TRIPLE QUANTITY pad. MEMORY OPERATION Memory Cooking * Your oven has 100 memory banks from 0 to 99. Memory number from 0 to 29 can be used in all 6 operating methods. (Single Digit Input has 10 memory banks). * Memory 0 - 9 are programmed as factory settings. See the table of Programmed Memories on the right side. Memory 10 - 99 must be programmed before using Memory Cooking. When a memory number which has not been programmed is entered, End will be shown in the display. See Saving Memories page EN-18 - EN-22 to program a new memory. Programmed Memories Memory No. 1 2 3 4 5 6 7 8 9 0 Cook time 10 sec. 20 sec. 30 sec. 45 sec. 1 min. 1 min. 15 sec. 1 min. 30 sec. 2 min. 2 min. 30 sec. 3 min. Power level 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% EN-8