Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 24
Changing the initial setting of DVD
View all Sharp SY-SAT50DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
SD-AT50 DX-AT50 ENGLISH Changing the initial setting of DVD Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accordingly. A new setting will be retained even if the DVD player is set to the stand-by mode. If you want to restore or change the setting, reset it. [Back] 1 Press the ON/STAND-BY button to turn the power on. ! The startup screen appears. ! If the startup screen does not appear, set the input to "DVD". ! The disc should be stopped at this time. 2 After pressing the button, press the SETUP DVD button. 3 Press the or button to select the menu and press the ENT but- ton. SET UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL Preparation for Use - Changing the initial setting of DVD - SELECT: SET: ENTER EXIT: SETUP CANCEL: RETURN 4 Press the or button to change the setting and press the ENT button. Example: "PLAYER MENU" is selected SET-UP LANGUAGE CONTROLS PLAYER MENU 1.ENGLISH 2.FRANÇAIS 3.ESPAÑOL SELECT: SET: ENTER EXIT: SETUP CANCEL: RETURN Repeat the operation as instructed. (The number of repetition depends on the setting item.) To change other settings, begin from step 3. 5 Press the SETUP DVD button. The new setting is memorized. Notes: ! You cannot display the setup screen while a disc is playing. ! See page 21 for selecting another language for disc menus. ! The previous screen appears by pressing the RETURN button while selecting an item or setting. E-19