Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 55
References
View all Sharp SY-SAT50DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
" DVD Player Symptom Possible cause Even though a disc has been ! Is the disc loaded upside down? loaded is displayed. ! Is the disc very dirty? Playback sounds are ! Does the disc satisfy the standards? skipped. ! Is the system located near exces- sive vibrations? ! Has condensation formed inside the system? The control buttons do not ! Is the disc very dirty? function. Music or video play- ! Does the disc satisfy the standards? back is interrupted. ! Is the system located near exces- sive vibrations? ! Has condensation formed inside the system? Pictures and sound are ! Is the disc very dirty? skipped. ! Is the system located near exces- sive vibrations? ! Has condensation formed inside the system? The system does not operate ! Is a disc other than DVD (region even if the power is on. number 1 or ALL), audio CD loaded? Image cannot be played ! Are the video and audio cables con- back. (Sound is not heard.) nected improperly? ! Is a disc other than DVD (region number 1 or ALL), audio CD loaded? ! Is the disc very dirty? ! Is the disc loaded upside down? ! Clean the optical pickup if it is dirty. ! Is the TV input set to "VIDEO 1/VIDEO 2" etc.? ! Is the system turned on? Reference page P. 48 P. 48 P. 48 P. 5 P. 11 - 15 P. 5 P. 51 P. 47 P. 18 " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: Resetting the AV control unit: 1 Unplug the subwoofer/amplifier unit. 2 While holding down the ON/STAND-BY button, plug in the AC power cord. At this time, the component will not be turned on. 3 Press the ON/STAND-BY button again to turn the power on. Caution: This operation will erase all data stored in memory and restore various settings to the initial status (default). Resetting the DVD player: Unplug the unit and, after waiting 5 minutes or longer, plug it in again. When the protection circuit is activated: When short-circuiting the speaker cords or turning the volume too high, the protection circuit may be activated and the power may turn off. Unplug the subwoofer/amplifier unit and plug it in again after 5 minutes or more. Turn down the volume if set too high. SD-AT50 DX-AT50 ENGLISH References - Troubleshooting chart - " Before transporting the system 1 Press the ON/STAND-BY button of the DVD player to turn the power on. 2 Open the disc tray and remove the disc. 3 Close the disc tray and enter the system to stand-by mode. 4 After the power indicator goes off, unplug the system. E-50